Use Instructions

The substrate must be clean, dry, and free from dust, oily substances, paints, mortar remains, efflorescence or other conditions which may prevent bonding. It is important to check that the coating is firm and bonded to the substrate. The ceramic tiles must meet above conditions, specially the cleanliness of the slip.

In a clean recipient, place the Votomassa Subfloor and add clean water slowly, as mentioned in the packaging instructions.

It is recommended to mix the subfloor in the mortar mixer, ensuring the consistency of the slightly damp type mortar.

Start the troweling, using the plastic finish trowel or wood float.
For final finish, spread cement on the surface, pulverize with water using a brush, and then, the steel or plastic finish trowel to complete.

IMPORTANT

When applying this product, ensure good compacting.