Technical Data

• Application - The VOTOMASSA STRUCTURAL SETTING is good for structural masonry setting of concrete, ceramic and siliceous limestone blocks of up to 10 MPa. It must not be used for ceramics and natural stones setting.
• Composition - Limestone artificial sand with controlled particle sizing, portland cement and special chemical additives.
• Classification - ABNT - NBR 13281/01           III - High - c
• Apparent Density - 1.50 a 1.55 g/cm
• Fresh Density - 1.80 a 1.85 g/cm
• Compressive strength to 28 days - NBR 13279/95       8.5 a 9.5 Mpa
• Water-Retention Capacity - NBR 13277/95         95 %
• Air Content - NBR 13278/95                18 to 22 %
• Water Addition - 15%
• Yield – by cm thick (real consumption may vary according to application) 19kg/cm

Votomassa reserves the right to modify the above specifications, without prior notice.