<< back
Presentation  |  Technical Data  |  Features  |  Use Instructions
Para cima
Para baixo
Clique e arraste
SPECIAL BLOCKS SETTING

Technical Data

 

  • Application - The VOTOMASSA SPECIAL BLOCKS SETTING is an adequate mortar for special (Self-placing Cellular Concrete) and architectural (Split and Stone) blocks setting. It must not be used for ceramics and natural stones setting.
  • Composition - Limestone artificial sand with controlled particle sizing, portland cement and special chemical additives.
  • Classification - ABNT - NBR 13281/01           III - High - c
  • Apparent Density - 1.50 a 1.55 g/cm
  • Fresh Density - 1.80 a 1.85 g/cm
  • Compressive strength to 28 days - NBR 13279/95   10.5 Mpa
  • Water-Retention Capacity - NBR 13277/95         90 %
  • Air Content - NBR 13278/95                20 to 21 %
  • Water Addition - 14%
  • Yield – by cm thick (real consumption may vary according to application) 20kg/cm


Votomassa reserves the right to modify the above specifications, without prior notice.